| Manufacturing | Design/CAD
| OEM Parts | Repair |
Materials | About Suter
| Contact Us
offer a variety of manual and CNC machining services based on the
accuracy, precision, cost,
quantities, and complexity of the shapes.
shapes with our lathes are not a problem due to our variety of machine
sizes from small parts to large parts that require heavy cuts. We
are able swing up to 24 inches in diameter, 12ft between centers,
and 4 inches through the spindle.
When it comes
to rectangular or special shapes, our mills cut a minimum of 12x24
area and as much as 18x42.
Do you need
highly accurate boring across a large area? We have a large jig
bore machine with 18"deep x 24"long x 18" vertical
travel and a 22"x44" table.
Give us a call
and we can discuss how your part can be made.
& Die Repair & Construction
Tool & Die
has been a part of Suter Machine since the beginning of the company.
When the company started in the 70's, Tool & Die jobs were our
Even with the
reduced need for Tool & Die craftmanship we still offer our
repair services to keep your existing tooling and die sets in excellent
We also offer
new Tool & Die construction. Do you need new tooling or a special
stamping die set made? We can help you.
Machine Design & Construction
you need a special application machine?
us your application and specifications and we can design your custom
machine and then build it.
machine example automates the heat transfer of ink patterns from
release coat paper to urethane ribbon at about 20 inch per minuite.
in house heat treating and tempering up to 10"wide x 20"deep
x 8"high of a variety of tool steels, alloys, and stainless
have a Rockwell Hardness tester to measure hardness.
If you have
large parts to be heat treated we can help you. We have a great
outside heat treating vendor that works with us on jobs we can't
handle in house.
roundness, and surface finish are critical for your part, we can
offer our grinding services.
We have multiple surface
grinders with tables up to 10"deep x 20"long x12"high.
Grinding round parts
are not a problem for us. We have a cylindrical grinder for small
round parts and our lathe attached tool post grinder for large round
Welding & Brazing
parts we make require welding of mating pieces. We can offer MIG
welding or more accurate TIG welding for critical parts.
can weld steels, stainless steels, and aluminum.
is also offered when mating parts with dissimilar materials.
& Plasma Cutting
Plasma cutting is typically
used to cut thick steel, stainless steel, and aluminum plate at
a cheaper cost and quicker rate than machining.
cutting is a good alternative to plasma cut and machining, offering
accurate cutting with no heat affected zones. This process can cut
just about any material without warping due to heat. Water cutting
is perfect for difficult to machine materials such as rubber.
only do we make precision parts and machines but we also make fabricated
parts and assemblies.
part includes precision machined parts, water cut stainless blanks,
a rolled ring, and TIG welding to hold some parts together.
All rights reserved